Home > Commercial Systems > Filtration Systems w/ Control Valve >

Fleck 2510/16AIF Automatic Iron Filter with Manganese GreensandPlus, 10" x 44"
2510-16AIFB-10-MG
2510-16AIFB-10-MG


 
Alternative Views:


Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)




Product Code: 2510-16AIFB-10-MG
Qty:

Description Spec Sheet / Manual
 
Features include Fleck 2510/1600 timer valves with PVC-injectors, environmental backplates and covers, 3/4" stainless steel bypass, black polyglass tanks, basket distributors, Manganese GreensandPlus, gravel bed and potassium solution tank.

Product Features:
  • Fully adjustable 5-cycle top mount control delivers controlled up-flow backwash, down-flow brining and slow rinse, rapid rinse, brine refill and downflow service
  • Time-tested hydraulically balanced piston, seal and spacer concept to control service flow and regeneration
  • Non-corrosive, high-tech material construction
  • Excellent flow rates – 19 GPM continuous, 24 GPM peak
  • Backwash capacity handles tanks up to 16" diameter for softener applications, 16” diameter for filter applications
  • Choice of 7 or 12 day clock, manual or meter initiated regeneration, mechanical or electronic control
Manganese GreensandPlus (for Iron Removal)

The silica sand core of GreensandPlus allows it to better withstand operating conditions in waters that are low in silica, TDS and hardness. Thus, if you currently are using manganese greensand and are feeding sodium aluminate, you will likely be able to eliminate the aluminate feed by switching to GreensandPlus. Also, GreensandPlus can withstand higher operating temperatures and higher differential pressures than can manganese greensand. The higher differential pressure may allow for a longer run length, but, if nothing else, allows for more operational margin of error.

GreensandPlus™ is a purple-gray filter media used for removing soluble iron, manganese, hydrogen sulfide, arsenic and radium from well water supplies.

Like its sister product manganese greensand, the substrate media has a manganese dioxide coated surface that acts as a catalyst in the oxidation- reduction reaction of iron and manganese. The difference between GreensandPlus™ and Manganese Greensand is in the substrate that forms the core of the media and the method by which the manganese dioxide coating is attached to that substrate. GreensandPlus™ has a silica sand core and the coating is fused to it while Manganese Greensand has a glauconite core and the coating is ionically bound to it.

The silica sand core of GreensandPlus™ allows it to better withstand operating conditions in waters that are low in silica, TDS and hardness. Thus, if you currently are using manganese greensand and are feeding sodium aluminate, you will likely be able to eliminate the aluminate feed by switching to GreensandPlus™. Also, GreensandPlus™ can withstand higher operating temperatures and higher differential pressures than can manganese greensand. The higher differential pressure may allow for a longer run length, but, if nothing else, allows for more operational margin of error.

Along with the added benefits comes the fact that GreensandPlus™ is an exact replacement for manganese greensand. It can be used in CR and IR applications and requires no changes in backwash rate or times or chemical feeds. GreensandPlus™ has received the WQA Gold Seal Certification for compliance with NSF/ANSI 61.

Capacity/Cu. Ft.:
Iron Alone: 550 gr. (10,000 gal. of water containing 1 ppm iron/cu. ft.)
Iron and Manganese: 400 gr. (7,000 gal. of water containing 1/2 ppm iron and 1/2 ppm manganese/ cu. ft.)
Hydrogen Sulfide: 175 gr. (3,000 gal. of water containing 1 ppm hydrogen sulfide. cu. ft.)

Advantages:
  • Iron removal over wide pH range
  • Effective removal of hydrogen sulfide in addition to iron and/or manganese
  • No harmful effects from a chlorine feed
  • Low attrition loss for long bed life
Physical Properties:
Color: Black nodular granules
Density: 85 lbs./cu. ft.
Effective Size: 0.30 - 0.35 mm
Uniformity Coefficient: 1.6
Mesh Size: 18 X 60
Attrition Loss Per Year: 2%

Conditions for Operation:
Raw Water pH: 6.2 - 8.5
Bed Depth: 30 in.
Freeboard: 35 - 50%
Service Flow Rate: 2 – 12 gpm/sq. ft. (5-12 m/hr)
Backwash Flow Rate: 12 gpm/sq. ft. at 55ºF (30 m/hr at 13ºC)
Maximum Temperature: No Limit
Maximum Practical Limit of Iron (Fe++) or Manganese (Mn++) In Raw Water: 15 ppm.
Maximum Practical Limit of Hydrogen Sulfide (H2S): 5 ppm.
Fleck 2510 Drain Hose
Fleck 2510 Brine Valve Repair
Fleck 2510 Meter Repair
Fleck 2510 Valve Tear-Down

Share your knowledge of this product. Be the first to write a review »