Home >

Enphase IQ 7+ Microinverter, 208/240 Volt, 295VA Peak Power, MC4 DC Connectors, Female AC Connector
Enphase IQ 7+ Microinverter, 208/240 Volt, 295VA Peak Power, MC4 DC Connectors, Female AC Connector


 

Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)



Availability:: Usually Ships in 3 to 5 Days
Product Code: IQ7PLUS-72-2-US
Qty:

Description Spec Sheet / Manual Technical Specifications
 
Enphase IQ 7+ Microinverter, 208/240 Volt, 295VA Peak Power, MC4 DC Connectors, Female AC Connector, Compatible with 60- and 72-cell PV Modules

Introducing the IQ 7 Series

Enphase's seventh-generation microinverters are powered by their unique software-defined architecture, offering an efficient design with a single hardware SKU worldwide. The IQ 7 Micro series produces 4% more power, and is 19% lighter and 17% smaller than the IQ 6 series.

The IQ 7 continues to offer the same ease of installation with revolutionary 2-wire cabling. It also leverages semiconductor integration for higher reliability and better economies of scale.

The smart-grid ready Enphase IQ 7 Microinverter series is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics. Its polymeric enclosure and revolutionary cabling system simplify installation.

  • Optimized for high powered 60-cell, 72-cell* modules
  • Max Output Power: 250 VA (IQ 7) or 295 VA (IQ 7+)
  • Recommended PV module input power: 235-350+ W (IQ 7) or 235-440+ W (IQ 7+)
  • MPPT Range: 27V – 37V (IQ 7), 27V – 45V (IQ 7+)
  • 97.5% CEC Efficiency
  • Configurable for variable grid profiles like Hawaiian Electric Company (HECO) Rule 14H, California Rule 21, and others

* The IQ 7+ Micro is required to support 72-cell modules

Input Data (DC

Commonly used module pairings235 W - 440 W +
Module compatibility60-cell and 72-cell PV modules
Maximum input DC voltage60 V
Peak power tracking voltage27 V - 45 V
Operating range16 V - 60 V
Min/Max start voltage22 V / 60 V
Max DC short circuit current (module Isc)15 A
Overvoltage class DC portII
DC port backfeed current0 A
PV array configuration1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit

Output Data (AC)
Peak output power
295 VA
Maximum continous output power290 VA
Nominal (L-L) voltage/range240 V / 211-264 V
208 V / 183-229 V
Maximum continuous output current1.21 A (240 V)
1.39 A (208 V)
Nominal frequency60 Hz
Extended frequency range47 - 68 Hz
AC short circuit fault current over 3 cycles5.8 Arms
Maximum units per 20 A (L-L) branch circuit13 (240 VAC)
11 (208 VAC)
Overvoltage class AC portIII
AC port backed current0 A
Power factor setting1.0
Power factor (adjustable)0.85 leading ... 0.85 lagging

Efficiency
 @240 V@208 V
Peak efficiency97.5 %97.3 %
CEC weighted efficiency97.0 %97.0 %

Mechanical Data
Ambient temperature range-40°C to +65°C
Relative humidity range4% to 100% (condensing)
Connector type (IQ7-60-2-US & IQ7PLUS-72-2-US)MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter)
Dimensions (WxHxD)212 mm x 175 mm x 30.2 mm (without bracket)
Weight1.08 kg (2.38 lbs)
CoolingNatural convection - No fans
Approved for wet locationsYes
Pollution degreePD3
EnclosureClass II double-insulated, corrosion resistant polymeric enclosure
Environmental category / UV exposure ratingNEMA Type 6 / outdoor

Share your knowledge of this product. Be the first to write a review »