Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)
FilmTec™ NF270-4040 Elements are ideal for removing a high percentage of TOC and THM precursors with medium to high salt passage and medium hardness passage in commercial systems. The NF270 nanofiltration membrane is an ideal choice for surface water and ground water where good organic removal is desired with partial softening. FilmTec NF270-4040 elements are tape-wrapped.
FilmTec™ Nanofiltration 4" Elements allow selective separation of organics and salts for medium-sized industrial and municipal water treatment plants that produce less than approximately 10 gpm (2300 L/h) of permeate.
Uses
Operating and Cleaning Limits
a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).b. Refer to Cleaning Guidelines in specification sheet 609-23010.c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure.We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.
a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).b. Refer to Cleaning Guidelines in specification sheet 609-23010.c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure.