(Suggested alternative: Toray TM710D)
FilmTec™ LC HR-4040 Elements produce high quality water with our state-of-the-art reverse osmosis membrane, meeting customer needs in commercial applications. DuPont’s fully automated element production enables the most consistent products in the industry that minimizes the total cost of ownership of water treatment systems.FilmTec™ Brackish Water Reverse Osmosis 4" Elements can separate salts from water and are produced with an automated fabrication process that ensures precision, consistency, and reliability. They are ideal for use in medium-sized water treatment system that produce less than approximately 10 gpm (2300 L/h) of permeate. Our RO membranes build on a tradition of leadership in the thin-film composite membrane industry and meet the challenges of higher rejection in lower-pressure operations.Uses
a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).b. Refer to Cleaning Guidelines in specification sheet 609-23010.c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure.We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.
a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).b. Refer to Cleaning Guidelines in specification sheet 609-23010.c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure.