Home > Membranes - RO/UF/NF > Filmtec >

Filmtec SW30-2514 Seawater Reverse Osmosis Element
Filmtec SW30-2514 Seawater Reverse Osmosis Element


 
Our Price: $278.00



Availability:: Please contact us for pricing and lead time. '$0' indicates no quote online.
Product Code: SW30-2514
Qty:

Description Spec Sheet / Manual Technical Specifications
 

Filmtec™ SR30-2514


FilmTec™ SW30-2514 Elements have one of the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. FilmTec SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.


FilmTec™ Seawater Reverse Osmosis < 4" Elements can separate salts from water and are produced with an automated fabrication process that ensures precision, consistency, and reliability. They are ideal for use in small-sized desalination systems that produce less than approximately 10 gpm (2300 L/h) of permeate.



Uses

  • Seawater desalination
  • Marine (yacht) applications

Advantages
  • High flux reduces energy use or pressure required
  • Good rejection results in good water quality

Product Specifications
  • Permeate Flow Rate gpd (m3/d): 150 (0.6)
  • Stabilized Salt Rejection (%): 99.4
  • Maximum Feed Flow Rate: 6 (1.4)

Operating and Cleaning Limits

Membrane TypePolyamide Thin-Film Composite
Maximum Operating Temperature113°F (45°C)
Maximum Operating Pressure1,000 psi (69 bar)
Maximum Element Pressure Drop15 psig (1.0 bar)
pH Range, Continuous Operation2-11
pH Range, Short-Term Cleaning1-13
Maximum Feed Silt Density Index (SDI)SDI5
Free Chlorine Tolerance<0.1ppm

a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).

b. Refer to Cleaning Guidelines in specification sheet 609-23010.

c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty. DuPont Water Solutions recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to technical bulletin 609-22010 for more information.


We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.

Share your knowledge of this product. Be the first to write a review »