Home >

Filmtec SW30HRLE-370/34i Seawater Reverse Osmosis 8" Element
Filmtec SW30HRLE-370/34i Seawater Reverse Osmosis 8" Element


 
Alternative Views:
Our Price: $867.00



Availability:: Please Call
Product Code: SW30HRLE-370-34I
Qty:

Description Spec Sheet / Manual Technical Specifications
 

Filmtec SW30HRLE-370/34i Seawater Reverse Osmosis 8" Element


(Suggested alternatives: Hydranautics SWC4-LD, Filmtec SW30HR-380, Filmtec SW30HRLE-400i, Hydranautics SWC5-LD, Filmtec SW30XLE-400i, Toray TM820M-400)

DOW FILMTEC™ SW30HRLE-370/34i Elements are a durable, high-rejection, high-productivity seawater element for use in high fouling or challenging feedwater conditions, helping to support smooth operations and low cost of water. DOW FILMTEC SW30HRLE-370/34i elements use a 34-mil feed spacer to lessen the impact of fouling on pressure drop across a vessel and enhance cleaning effectiveness and may be cleaned over a wider pH range (1 – 13) than other RO elements. iLEC™ Interlocking End Caps reduce system operating costs and the risk of o-ring leaks that can cause poor water quality.


Membrane TypePolyamide Thin-Film Composite
Maximum Operating Temperature113°F (45°C)
Maximum Operating Pressure1,200 psig (83 bar)
Maximum Element Pressure Drop15 psig (1.0 bar)
pH Range, Continuous Operation2 - 11
pH Range, Short-Term Cleaning (30 min.)1 - 13
Maximum Feed Silt Density Index (SDI)SDI 5
Free Chlorine Tolerance< 0.1ppm
Maximum temperature for continuous operation above pH 10 is 95°F (35°C).


Used In:

  • Seawater desalination
  • Municipal drinking water
  • Industrial desalination

Advantages:

  • High Permeability And High High Flux Reduces Energy Use Or Pressure Required
  • Good Rejection Results In Good Quality Water
  • High boron rejection
  • ILEC™ Interlocking End Cap For Better Productivity And Reliability

Share your knowledge of this product. Be the first to write a review »