Home > Membranes - RO/UF/NF > Filmtec >

Filmtec TW30-1812-100 RO Membrane
Filmtec TW30-1812-100 RO Membrane


 

Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)



Availability:: Please contact us for pricing and lead time. '$0' indicates no quote online.
Product Code: TW30-1812-100
Qty:

Description Technical Specifications
 

Filmtec™ TW30-1812-100

(Suggested alternative: Hydranautics SWC5 MAX, Toray TM820V-440)

DOW FILMTEC™ reverse osmosis (RO) membranes for home drinking water treatment units are the most reliable and consistent elements in the industry. Advanced membrane technology and automated fabrication allow Dow to precisely produce each and every element to tight, pre-defined specifications. Dow’s advanced and consistent RO element quality helps customers deliver systems that reliably provide low impurity drinking water. DOW FILMTEC™ elements are shipped dry for convenient handling and long shelf-life.

Uses

  • Under the sink water treatment
  • Point-of-use reverse water treatment systems
  • Production of home drinking water

Advantages
  • High flux results in greater yield (more water)
  • Shipped dry for long shelf life
  • Filmtec performance and quality

Product Specifications
  • Permeate Flow Rate gpd (m3/d): 100 (16)
  • Minimum Salt Rejection %: 90
  • Stabilized Salt Rejection %: 90

Operating and Cleaning Limits

Membrane TypePolyamide Thin-Film Composite
Maximum Operating Temperature113°F (45°C)
Maximum Operating Pressure300 psig (21 bar)
Maximum Feed Flow Rate2.0 gpm (7.6 lpm)
pH Range, Continuous Operation2-11
pH Range, Short-Term Cleaning1-13
Maximum Feed Silt Density Index (SDI)SDI5
Free Chlorine Tolerance<0.1ppm

a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).

b. Refer to Cleaning Guidelines in specification sheet 609-23010.

c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty. FilmTec Corporation recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to technical bulletin 609-22010 for more information.


We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.

Share your knowledge of this product. Be the first to write a review »