Filmtec™ TW30-1812-100HR

FilmTec™ TW30-1812-100HR Elements for home drinking water treatment units produce 100 GPD (15.8 L/h) of permeate with 98% stabilized salt rejection at standard test conditions. They are the most reliable and consistent elements in the industry. They are shipped dry for convenient handling and long shelf-life. FilmTec TW30-1812-100HR elements have been tested and certified by NSF International against NSF/ANSI Standard 58 for material requirements only for safe use in drinking water applications.

FilmTec™ Tap Water Reverse Osmosis Elements feature advanced membrane technology and offer outstanding reliability and consistency. Our automated fabrication process allows precise production of every element to tight, pre-defined specifications, helping customers develop and maintain brand recognition along with a reputation for building systems that reliably provide low-impurity drinking water.


Uses

• Under the sink water treatment
• Point-of-use reverse osmosis water treatment systems
• Production of high quality home drinking water

• New high flux, high-rejection membrane chemistry
• High stabilized salt rejection
• High active membrane area
• Constructed for optimized performance
• Robust in high hardness water applications
• Shipped dry for long shelf life

• Permeate Flow Rate gpd (m3/d): 100 (15.8)

• Typical Stabilized Salt Rejection %: 98

Operating and Cleaning Limits

a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).

b. Refer to Cleaning Guidelines in specification sheet 609-23010.

c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty. FilmTec Corporation recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to technical bulletin 609-22010 for more information.

We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.