FilmTec™ TW30HP-4619

FilmTec™ TW30HP-4619 Elements are 4.6-inch diameter reverse osmosis elements offering high quality water for sanitary applications, using the high performance TW30HP membrane, which offers excellent permeate flow and salt rejection. These elements are made with the same high quality materials of construction as our larger FilmTec™ elements used in municipal and industrial systems. For added convenience during shipping, storage, and loading, these elements are available as either wet or dry products.

FilmTec™ Specialty 4" Elements have been developed through industry-leading research to meet special application requirements such as maple sap concentration, sanitary dairy applications, and heat-sanitizable products for use in medical applications.


Uses

• Medical applications

• Sanitary uses

• High flux rates

• Full-Fit Design
• Consistent Quality From Automated Rolling

• Permeate Flow Rate gpd (m3/d): 1,200 (4.54)

• Stabilized Salt Rejection %: 99.0
• Maximum Feed Flow Rate, gpm (m3h): 18 (4.1)

a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
b. Refer to Cleaning Guidelines in specification sheet 609-23010.
c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure. Please refer to technical bulletin 609-22010 for more information

We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.