PROCON's Series 1 pumps have the protection of an integral inlet strainer. The standard strainer is a 100 mesh wire screen. It traps particles that can cause serious damage to the pump. The strainer is equipped with a removable cap to allow periodic cleaning, every 4 months under normal conditions (more frequently with hard or turbid water). The clamp-on mounting style is shown in the photo; bolt-on mounting is also available.
Brief Description: Brass housing with integral relief valve, 3/8" NPT portsPrimary Application: Carbonated Water
Secondary Application: Welding
Additional Applications: Carbonatation, Espresso/Coffee, Welding, Cold Carb Circulation, Reverse Osmosis, Beer Chillers, Pesticide Systems, Solar Applications
Mounting Styles: Clamp-on, Bolt-on
Body Material: Type 303 stainless steel or brass
Nominal Speed: 1725 RPMCapacity: 15 to 140 GPH
Typical Horsepower Required: .25 to .50 HP
Maximum Discharge Pressure: 250 PSI
Rotation (viewed from nameplate): Clockwise
Dry Weight: Approximately 2.5 lbs.
Dimensions: 3.56" x 3.49" x 3.86"
Self Priming (water): 6 ft. Maximum Lift
Port Size: 3/8 NPT Inlet and Outlet