Home > Myron L Meters and Sensors >

Myron L CS51LC Conductivity Sensor
Myron L CS51LC Conductivity Sensor
 



Product Code: CS51LC


T: 		Titanium electrode body (replaces stainless steel electrode body) [Add $70.50]

25 ft Cable: 		Extend sensor cable length to 25ft [Add $30.50]

100 ft Cable: 		Extend sensor cable length to 100ft [Add $108.00]

PV: 		1/2" PVDF fitting (replaces standard 3/4" polypropylene fitting) [Add $51.00]

HPSS: 		1/2" High pressure stainless steel fitting (replaces standard 3/4" polypropylene fitting) [Add $132.50]

SQC: 		Quick Connect sensor cable M/F [Add $70.50]

STF*:

Please call +1-408-969-2688 or email [email protected] to place order.
Description Spec Sheet / Manual Technical Specifications
 
CS51LC sensors (0.1 constant) are used for ranges of 0-5 and below. These reliable sensors feature an integral temperature sensor to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene bushing is modular for easy inexpensive replacement. Several alternatives for the metal portion of the sensor are available, depending on the demands of the application.

INCLUDES
• Sensor with 10ft cable
• 3/4" MNPT bushing fitting (standard)
BENEFITS
• Economic Value
• Small, Convenient Size
• 100 psi at 100°C
• General Purpose Use
• Field Replaceable

DESCRIPTION
Wetted materials of construction are 316 stainless steel and Teflon®*, with double O-ring seals at all points. The first EPR O-ring bears the brunt of process interface, allowing the second O-ring to maintain reliable sealing, free from chemical attack. An integral temperature element allows automatic compensation for maximum accuracy. Leads are 10 ft./3 meters standard. Process connections are made via a bored through swage 3/4” NPT fitting as standard. This fitting may be installed into a line or tank, or may be reversed and connected to a standpipe for use in a submersion configuration. The CS51 is ideal for general purpose use up to 20,000 µS/ppm.