 |
 |
 |
|
CS51LS sensors (1.0 constant) are used between 0-10 and 0-20,000. These reliable sensors feature an integral temperature sensor to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene bushing is modular for easy inexpensive replacement. Several alternatives for the metal portion of the sensor are available, depending on the demands of the application. INCLUDES
• Sensor with 10ft cable
• 3/4" MNPT bushing fitting (standard)
BENEFITS
• Economic Value
• Small, Convenient Size
• 100 psi at 100°C
• General Purpose Use
• Field Replaceable
DESCRIPTION
Wetted materials of
construction are 316
stainless steel and Teflon®*,
with double O-ring seals
at all points. The first EPR
O-ring bears the brunt of
process interface, allowing
the second O-ring to maintain
reliable sealing, free from
chemical attack. An integral
temperature element allows
automatic compensation
for maximum accuracy.
Leads are 10 ft./3 meters
standard.
Process connections
are made via a bored
through swage 3/4” NPT
fitting as standard. This
fitting may be installed into
a line or tank, or may be
reversed and connected
to a standpipe for use in a
submersion configuration.
The CS51 is ideal for
general purpose use up to
20,000 µS/ppm.
SENSOR SPECIFICATIONS - Temperature Compensation: Integral thermistors provide automatic TC to 25'C between 0-100'C/32-212'F.
- Pressure /Temperature Limits: CS51: 100 psi / 690 kPa @ 100'C/212'F. 250 psig @ 205'C, Models CS40 and CS41 sensors available on special order.
- Bushing: Modular Polypropylene threaded 3/4" NPT. 1/2" PVDF or 316 stainless steel fittings available as option.
- Cable: Shielded 10 ft./3 meters standard 25 and 100 ft./ 8 and 30 meter lengths available. 100 ft./30 meter is maximum recommended.
- Dimensions: CS51LS: Metal portion 108 L x 13 Dia. mm/ 4.25 L x .5 Dia. in.
|
|
|
 |
|
 |
|