Please contact ForeverPure for Pricing. (Call 408-969-2688 ext. 1 for Sales Department)
FilmTec™ HSRO-390-FF Elements are heat-sanitizable reverse osmosis elements that deliver outstanding quality water with the added capability to withstand sanitization with hot water, eliminating the need for chemical sanitizers. FilmTec HSRO elements, manufactured on advanced automated equipment, have the highest active membrane area allowing system designs with either lower operating flux or cost savings from fewer membrane elements. The full-fit configuration minimizes stagnant areas and is optimal for applications requiring a sanitary design. All components comply with U.S. Food & Drug Administration standards.FilmTec™ Specialty 8" Elements have been developed through industry-leading research to meet special application requirements such as ultrapure water for the fabrication of microelectronics, the removal of sulfate from injection water on offshore oil platforms, heat-sanitizable products for use in medical applications, and the concentration of maple sap.Uses
a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).b. Refer to Cleaning Guidelines in specification sheet 609-23010.c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure.We are a volume seller of FilmTec and Hydranautics membranes. Please contact use for large quantity discounts.
a. Maximum temperature for continuous operation above pH 10 is 95°F (35°C).b. Refer to Cleaning Guidelines in specification sheet 609-23010.c. Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, it is recommended that residual free chlorine be removed by pretreatment prior to membrane exposure.