Overview
The Procon 105A240F31BC is a positive-displacement rotary vane water pump manufactured by Procon (CEME Group). Its stainless steel housing is built to deliver 240 GPH (908 LPH) at up to 99 PSI with consistent flow across the entire pressure range. Procon rotary vane pumps are self-priming (water), maintenance-free, and virtually silent, making them a standard component in reverse-osmosis, carbonation, beverage-dispensing, coffee, and cooling systems worldwide.
Typical Applications
Reverse Osmosis, Booster Pump, Desalination (Pre-treated Feed), Circulation, Solar, Hydraulic, Cooling, General
Key Features & Benefits
- Positive-displacement design delivers consistent flow at variable pressures
- Self-priming with water; maintenance-free apart from optional strainer cleaning
- Low starting torque — compatible with standard carbonator motors
- Quiet operation with low vibration and pulsation (≤ 60 dBA)
- Stainless Steel housing rated for clean fluid service up to 160�F and 100cP viscosity
- Built to Procon ISO-9001 quality system in Mexico and Ireland
Installation Notes
- Provide clean, filtered fluid on the suction side. Use a strainer if the source may contain debris.
- Do not run the pump dry for more than 2 minutes — dry running will damage the internal vanes and mechanical seal.
- Do not operate against a closed discharge without a relief valve.
- Suction pressure: positive inlet pressure recommended above 2,400 RPM; minimum 20 PSI inlet is required for Series 6 at full speed.
- Pump inlet / outlet is 1/2-inch NPT thread.
About Procon
Established in 1948, Procon engineers dependable positive-displacement vane and gear pumps. Part of the CEME Group (acquired by Investindustrial in 2023), Procon operates ISO-9001 certified plants in North America, Europe and Asia Pacific and serves OEMs in 70+ countries. Procon rotary vane pumps are the industry standard in commercial carbonation, espresso, and reverse-osmosis systems.
Question? Please contact us
