Model:
SWRO-500
500-600 GPD/ 1900-2300 LPD
Seawater
Reverse Osmosis Desalination System (Watermaker)
Daily production
rate: 500-600 GPD/ 1900-2300 LPD
Feed water: less
than 40000 ppm
Required feed water
pressure: 40 psi
Average feed water
temperature: 25 °C/ 77 °F
Product water
quality: less than 500 ppm
Recovery Rate: 16%
Feed water rate: 1.8
GPM
Working Pressure: up to 950
psi
Dimension (L x W x
H): 114 x 41 x 45.7 (cm)/ 45 x 16
x 18 (in)
Weight: 115 lb/ 52 kg
RO System
The construction of the membrane is a
Thin Film Composite (TFC). It is the highest quality membrane
available in the industry. The reverse osmosis pressure vessel is a
heavy-duty housing made of corrosion resistant fiberglass.
Pre-Filtration System: PVC
housing, 5-micron cartridge type sediment filter further reduces
suspended solids in the feed water stream to RO system. It protects
the RO high-pressure pump and lead end RO membrane elements from
debris. 5
GPM rating. 1
No.
Membrane
Housing:
fiberglass, 2.5"
housing, holds 1
membrane, 1000
psi rated pressure vessel, 2 No.
Membranes: 2 No.
2.5"x40"
High
pressure RO Pump:
CAT Pump, 316 Stainless Steel.
Motor
(120VAC/60hz/single
phase): 1 HP, TEFC.
High
pressure side piping material:
316L Stainless Steel
Low
pressure side piping material:
Schedule 80 PVC
Concentrate
control valve:
316 Stainless Steel
Water
quality monitor:
product water TDS meter
Flow
meters:
Panel Mount Flow Meters
for feed water and product water.
Pressure
Gauges:
Feed Water Pressure,
working pressure, Concentrate
System
controls (automatic
operation):
Automatic control to
provide start/stop, sequential, and alarm control.
RO
System start permissible conditions:
Power On
Start
button pushed
No Low
pressure Fault
- No High Pressure Fault
Permeate
water tank level below low level (low and high level switches are on
open
position)
Five conditions will cause the RO to shut down
the machine:
High
working pressure,
Low
inlet pressure (<20 psi)
Fuse overload
Product
water storage tank level high
Stop button pushed.