FEDCO HPB-90 Hydraulic Pressure Booster Turbocharger Energy Recovery Device
Manufactured by Fluid Equipment Development Company (FEDCO), Monroe, Michigan, USA — supplied by ForeverPure Corporation, an authorized FEDCO distributor based in Santa Clara, California.
The FEDCO HPB is a hydraulic energy-recovery turbocharger that captures pressure energy from the SWRO brine reject stream and uses it to boost feed pressure into the membrane train, reducing the size and energy consumption of the high-pressure feed pump by up to 50%. The HPB is the only turbocharger ERD independently tested above 80% transfer efficiency. Transfer efficiency scales with frame size, with the largest HPB frames exceeding 83%. FEDCO custom-engineers every unit to your duty point and issues a certified performance datasheet with the quotation.
Made to Order — Call for Availability
Each FEDCO energy recovery device is built to order at the FEDCO factory in Monroe, Michigan, sized to the customer's specific duty point (flow, pressure, feed TDS, recovery, materials of construction).
Made to order and built to your duty point. Contact us for current lead time and availability.
Call +1-408-969-2688 or request a quote — ForeverPure's applications team will confirm the right model, options, lead time, and project pricing.
Theory of Operation
Brine exits the membrane vessels at near-feed pressure. Inside the HPB, this brine drives a single-stage radial turbine wheel that is direct-coupled (one rotor, no gearbox) to a single-stage centrifugal pump impeller on the feed side. The brine's pressure energy is converted to shaft work and immediately re-imparted to the feed stream as a pressure boost. An integral variable-area brine control valve sets brine flow without an external valve. FEDCO's patented RotorFlo™ design provides internal hydraulic lubrication of non-metallic bearings, so the HPB has no external lube circuit.
| Manufacturer | Fluid Equipment Development Company (FEDCO) |
| Manufacturing Location | Monroe, Michigan, USA |
| Model / SKU | HPB-90 |
| Equipment Type | Energy Recovery Device |
| Product Family | Hydraulic Turbocharger (HPB™ / HPB Boosted™ / HPB Ultra™) |
| Flow Capacity | HPB: 10–3,460 m³/h (44–15,234 gpm). Model number is the nominal feed flow in m³/h (e.g. HPB-500 ≈ 500 m³/h). Best efficiency within ±20% of nominal flow. |
| Operating Pressure | Standard: <83 bar (1,200 psi). HPB Ultra: <124 bar (1,800 psi) for 20–250 m³/h frames; <104 bar for 250–350 m³/h frames. |
| Wetted Materials | Casing & Rotor: Duplex SS 2205 or Super Duplex SS 2507. Casing bolts: 316 SS. O-rings: Buna-N. |
| Bearings / Lubrication | Non-metallic; Rotor Flo™ patented internal lubrication (no external grease/oil, no metal-to-metal contact) |
| Efficiency | Frame-dependent; verified on FEDCO precision test stands and field log sheets. Certified efficiency at your duty point is issued with the quotation |
| Operating Temperature | <70°C (158°F) |
| Service Fluid | Seawater, Brackish Water, Potable Water, RO Concentrate (20-micron filtration upstream) |
| Warranty | 3-year limited warranty (36 months from ship date) |
| Country of Origin | United States |
| HTS Code | 8413.70.20.90 |
| Manufacturer Quality | ISO 9001:2015 and ISO 14001:2015 registered |
| Datasheet & Performance Curve | Available on request — contact ForeverPure |
Key Engineering Advantages
- Up to 50% reduction in SWRO specific energy consumption
- >80% transfer efficiency (industry-leading among turbocharger ERDs)
- Recovers >80% of brine hydraulic energy
- Patented RotorFlo™ single-piece rotor — no external lubrication
- Integral variable-area brine control valve eliminates separate brine throttle
- Self-regulating — stable under feed-quality and temperature variation
- Zero brine mixing with feed (unlike isobaric pressure exchangers)
- Lowest CAPEX among ERD classes for small-to-medium SWRO
Applications & Industries
Typical Applications
- Seawater Reverse Osmosis (SWRO) energy recovery
- High-recovery brackish-water RO
- Interstage pressure boosting in BiTurbo high-recovery RO trains
- Retrofit upgrade to existing HP-pump-only SWRO plants
Industries Served
- Municipal desalination
- Hotels, islands, and resorts
- Marine / offshore
- Oil & gas (produced water)
- Industrial water reuse
Sizing & Selection
Model number convention: nominal feed flow in m³/h. Best efficiency is typically achieved within ±20% of nominal flow — for duty points outside this range, consult ForeverPure to confirm the correct frame size.
Provide your feed flow, required boost / discharge pressure, feed TDS, recovery, and temperature with your quote request. ForeverPure's applications team returns the correct model, options, lead time, and project-specific pricing.
Frequently Asked Questions
What is the FEDCO HPB-90?
The FEDCO HPB is a hydraulic energy-recovery turbocharger that captures pressure energy from the SWRO brine reject stream and uses it to boost feed pressure into the membrane train, reducing the size and energy consumption of the high-pressure feed pump by up to 50%. The HPB is the only turbocharger ERD independently tested above 80% transfer efficiency. Transfer efficiency scales with frame size, with the largest HPB frames exceeding 83%. FEDCO custom-engineers every unit to your duty point and issues a certified performance datasheet with the quotation.
What is the FEDCO HPB-90 used for?
Typical applications include seawater reverse osmosis (swro) energy recovery; high-recovery brackish-water ro; interstage pressure boosting in biturbo high-recovery ro trains. Industries served: municipal desalination, hotels, islands, and resorts, marine / offshore.
What materials of construction does the FEDCO HPB-90 use?
Wetted parts are casing & rotor: duplex ss 2205 or super duplex ss 2507. casing bolts: 316 ss. o-rings: buna-n., providing corrosion resistance suited to seawater and chloride-rich brackish-water service.
How does a FEDCO turbocharger ERD compare to an isobaric pressure exchanger (PX, iSave, APM)?
FEDCO turbocharger ERDs (HPB, HP-HEMI) recover brine pressure energy through a hydraulic turbine that directly boosts the feed stream — a single rotating assembly with no piston cycling and no brine-feed mixing. Isobaric pressure exchangers (Energy Recovery Inc. PX, Danfoss iSave, Danfoss APM) instead transfer pressure through ceramic rotors or pistons between brine and feed streams. Turbochargers are mechanically simpler, have zero brine-to-feed mixing, are well-suited to small-to-medium SWRO and packaged plants, and FEDCO's largest HPB frames demonstrate up to 83%+ transfer efficiency in the field.
Where can I get the FEDCO HPB-90 datasheet, performance curve, and pricing?
Datasheet, drawings, and project-specific pricing for the FEDCO HPB-90 are available on request from ForeverPure Corporation. Submit a quote request through the website with your duty-point information and the applications team will respond with model selection, options, lead time, and pricing.
Is the FEDCO HPB-90 in stock, and what is the lead time?
The FEDCO HPB-90 is built to order at the FEDCO factory in Monroe, Michigan — each unit is sized to the customer's specific duty point, materials of construction, and configuration options. Lead time varies by model, materials and current factory loading. Call ForeverPure at +1-408-969-2688 or submit a quote request for current schedule and to confirm availability for your project.
What is the warranty on the FEDCO HPB-90?
Warranty: 3-year limited warranty (36 months from ship date). Extended-warranty options are available on request. ForeverPure provides factory-authorized installation, commissioning, and spare-parts support.
Need engineering support, sizing help, or a project quote?
Contact ForeverPure Corporation — Authorized FEDCO Distributor • Santa Clara, CA • +1-408-969-2688 • sales@foreverpure.com
