Skip to main content
ForeverPure Contact Us +1-408-969-2688

FEDCO MSD-650 Multi Stage Duplex Pump

FEDCO

Contact us for pricing

(No reviews yet) Write a Review
SKU:
MSD-650
Availability:
Made to Order — Contact Us
Brand:
FEDCO
Water-Source:
Seawater
Product-Category:
High Pressure Pump
Series:
MSD
Manufacturer-Location:
Monroe, Michigan, USA
Country-of-Origin:
United States
HTS-Code:
8413.70.20.90
Pump-Type:
Multistage Centrifugal Pump
Material:
Super Duplex Stainless Steel
Flow-Rate-GPM:
1,431–4,007 GPM
Max-Pressure-PSI:
1200 PSI

FEDCO MSD-650 Multi Stage Duplex Pump

Manufactured by Fluid Equipment Development Company (FEDCO), Monroe, Michigan, USA — supplied by ForeverPure Corporation, an authorized FEDCO distributor based in Santa Clara, California.

The FEDCO MSD is a horizontal multistage centrifugal high-pressure pump in Super Duplex stainless steel throughout, built to order for seawater and brackish-water reverse osmosis, produced-water recycling and industrial process duty. The patented FEDCO Water Bearing™ carries the full hydraulic thrust load so none reaches the motor, and the pump runs with no oil or grease anywhere.

Made to Order

Each unit is built to order at the FEDCO factory and hydraulically designed to your duty point (flow, pressure, feed TDS, recovery, materials of construction). Call +1-408-969-2688 or request a quote — ForeverPure's applications team will confirm the model, options and current lead time.

TECHNICAL SPECIFICATIONS — FEDCO MSD-650 Multi Stage Duplex Pump

ManufacturerFluid Equipment Development Company (FEDCO)
Manufacturing LocationMonroe, Michigan, USA
Model / SKUMSD-650
Equipment TypeMultistage Centrifugal High-Pressure Pump
Flow Capacity325–910 m³/h (1,431–4,007 gpm) — the MSD-650 operating range. Model number is the nominal flow in m³/h. Best efficiency within ±20% of nominal.
Pipe ConnectionsFeed inlet 10" · feed outlet 10", cut-groove
Operating Pressure<83 bar (1,200 psi) maximum operating pressure. Maximum inlet pressure <10.3 bar (150 psi).
Wetted MaterialsShaft: Super Duplex SS S32750. Inlet/discharge and impellers/diffusers: Super Duplex SS S32760 (ASTM A995 6A). Stage bolting: 316 SS. Mechanical seal: 316 carbon/silicon carbide, Buna-N.
Bearings / LubricationPatented FEDCO Water Bearing™ — non-metallic, product-water lubricated, no oil or grease
EfficiencyContact FEDCO for specific performance data. Certified efficiency at your duty point is issued with the quotation
Service FluidSeawater, brackish water, fresh water (20-micron filtration upstream)
Warranty18-month standard warranty
Country of OriginUnited States
HTS Code8413.70.20.90
Manufacturer QualityISO 9001:2015 and ISO 14001:2015 registered
Datasheet & Performance CurveAvailable on request — contact ForeverPure

Specifications from FEDCO's MSD-650 specification sheet (Feb 2021). FEDCO reserves the right to change specifications without notice — confirm all figures against a current FEDCO quotation before purchase.

\n