| Identification |
| Model / SKU | PS6FCE-BD |
| Brand | Myron L® Company |
| Product Type | PoolPro™ handheld instrument |
| Measures | Conductivity, TDS, Salinity, pH, ORP, FCE™ & Temperature |
| Country of Origin | United States |
| Measurement |
| Measured Parameters | Conductivity, mineral/salt concentration, TDS, pH, ORP, Free Chlorine Equivalent, temperature |
| Accuracy | ±1% of reading (±0.1% at the calibration point) |
| Built For | Pool and spa water balance — salt concentration reads directly for saline pools |
| Display | 4-digit LCD |
| Memory | Non-volatile, up to 100 readings with date and time stamp |
| Physical & Power |
| Case / Cell Material | VALOX® |
| Power | 9 V alkaline battery |
| Battery Life | 100 hours / 5,000 readings |
| Operating / Storage Temperature | 0-55 °C / 32-132 °F |
| Protection Rating | IP67 / NEMA 6 — waterproof to 1 m / 3 ft |
| Dimensions | 196 × 68 × 64 mm / 7.7 × 2.7 × 2.5 in. (L × W × H) |
| Weight | 352 g / 12.4 oz (instrument) |
| Wireless | bluDock™ installed — Bluetooth® transfer to a PC running Guardian2™ software (Windows) |
What is in the box
PS6FCE-BD instrument with bluDock option installed
bluDock™ wireless option
This is the same instrument as the PS6FCE with the bluDock™ module factory-installed. It transfers stored readings to a PC over Bluetooth® using Myron L’s Guardian2™ software. Guardian2 is Windows-only — there is no current macOS build. The module is internal, so the two versions look identical.
Warranty
Two (2) Year Limited Warranty on the instrument. pH and ORP sensors carry a Six (6) Month Limited Warranty. Warranty is limited to repair or replacement at the manufacturer’s discretion and excludes damage from abuse, tampering or environmental extremes.
WHERE THIS IS USED — 2 APPLICATIONS
Myron L publishes an application bulletin for each of these. The summaries below are ours; the linked bulletins are Myron L’s own and open in a new tab.
Oxidation Reduction Potential (ORP / Redox)
Disinfection, process control, water treatment
ORP measures the strength of the oxidisers and reducers present rather than their concentration, and it is reported in millivolts with no temperature correction. That distinction matters: a chlorine residual tells you how much is there, while ORP tells you how effectively it is actually oxidising. Positive readings indicate an oxidising solution such as chlorinated water; negative readings indicate a reducing agent such as sodium sulfite.
Measured here: ORP / redox, pH, free chlorine equivalent
📄 Oxidation Reduction Potential (ORP / Redox) Application Bulletin (PDF)Pool & Spa
Aquatic facilities, service professionals
Pool chemistry is a set of interdependent variables that has to satisfy both bather safety and regulation. Warm, still water is ideal for microorganisms, so it must be circulated, filtered and sanitised — but the same chemicals that control the microbiology can make water uncomfortable or unsafe, and unbalanced water attacks the structure itself. Conductivity or salt concentration, pH, ORP and free chlorine equivalent together describe sanitiser effectiveness and water balance in one pass.
Measured here: Conductivity / TDS / salinity, pH, ORP, free chlorine equivalent, LSI
📄 Pool & Spa Application Bulletin (PDF)Application areas are those in which the Myron L® Company’s own application bulletin names this instrument. Bulletins are reproduced unaltered with Myron L’s copyright notices intact. Suitability for a specific installation should be confirmed with us before purchase.
Specifications taken from the PoolPro Data Sheet and myronl.com, published by the Myron L® Company. Myron L reserves the right to change design, specifications and prices without notice — please confirm critical figures with us before purchase. Myron L®, Ultrameter®, Ultrapen™, UltrapenX2™, TechPro™, PoolPro™, bluDock™, Guardian2™, FCE™ and 442 Natural Water™ are trademarks of the Myron L Company. VALOX® is a registered trademark of SABIC. Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
