DuPont™ Inge™ MB 0.9 XL 38 OP — 38 m² Multibore™ PES ultrafiltration module for Open Platform skids. Previously sold as DuPont™ IntegraTec MB 38.
DuPont has renamed this module. IntegraTec MB 38 is now
DuPont™ Inge™ MB 0.9 XL 38 OP. The part number IN-0070 and
GMID 12071518 are unchanged, and the data sheet keeps form number 45-D02254-en —
it is the same module. If your specification, drawing or purchase order still reads
“IntegraTec MB 38”, this is the item to order; the label and shipping paperwork will read the
Inge name. Tell us if your document control needs the superseded name shown on the packing list.
38 m²Active membrane area
0.02 µmNominal pore size
0.9 mmCapillary inner dia.
250 mmModule diameter
Specifications
| Identification | |
|---|---|
| DuPont Part Number | IN-0070 |
| DuPont GMID | 12071518 |
| Current product name | DuPont™ Inge™ MB 0.9 XL 38 OP Module |
| Superseded name | DuPont™ IntegraTec™ MB 38 |
| Membrane | |
| Membrane Type | Multibore™ |
| Membrane Material | PESm |
| Nominal Membrane Pore Size | 0.02 µm |
| Capillary Inner Diameter | 0.9 mm |
| Mode of Filtration | In-Out Pressurized |
| Module Operating Process | Dead-end |
| Dimensions | |
| Active Membrane Area | 38 m² / 409 ft² |
| Module Length (L) | 985 ±1.5 mm / 38.8 inch |
| Module Diameter | 250 ±1.5 mm / 9.8 inch |
| Length with End Caps (L2) | 1,179 ±3.0 mm / 46.4 inch |
| Filtrate / Backwash Port (D) | 50.8 mm / 2 inch |
| Materials | |
| Housing Material | PVC-U, white |
| End Cap Material | PVC-U, grey |
| End Cap Coupling Material | SS (EPDM sealing) |
| Weight and Volume | |
| Shipping Weight | 32 kg / 71 lbs |
| Weight Filled | 66 kg / 146 lbs |
| Hold-Up Volume, Feed (CIP) | 14 L / 3.6 gal |
| Hold-Up Volume, Membrane Structure (CIP) | 10 L / 2.7 gal |
| Hold-Up Volume, Filtrate (CIP) | 17 L / 4.5 gal |
| Suggested Operating Conditions | |
| Operating Temperature Range | 1 - 45 °C / 34 - 113 °F |
| Operating pH | 2 - 12 |
| Cleaning pH | 1 - 13 |
| Typical Filtration TMP | 0.1 - 0.6 bar / 1.5 - 8.7 psi |
| Typical Backwash TMP | 0.3 - 2.0 bar / 4.4 - 29.0 psi |
| Backwash Flux | 230 L/(m²h) / 135 gfd |
| Backwash Flow | 8.7 m3h 38.3 gpm |
| Operating Limits (Maximum) | |
| Filtration TMP | 1.5 bar / 22 psi |
| Backwash TMP | 3.0 bar / 44 psi |
| Filtration Flux | 180 L/(m2h) 106 gfd |
| Filtration Flow | 6.8 m3h 29.9 gpm |
| Backwash Flux | 300 L/(m²h) / 176 gfd |
| Inlet Pressure at max 40°C | 5 bar / 73 psi |
| Rate of Pressure Change | 0.5 bar/sec / 7.3 psi/sec |
| Rate of Temperature Change | 5 °C/min / 9 °F/min |
| Particle Size | 300 µm |
| NaOCl Exposure | ≤ 500,000 ppm x h (at pH ≥ 9.5) |
| NaOCl Concentration | 2,000 ppm |
Values as published by DuPont in Form No. 45-D02254-en, Rev. 5 January 2026.
Supplied as
Each
About this technology
A Multibore™ module separates by physical size rather than by chemistry, so removal depends on pore size and membrane integrity rather than on feed chemistry. Each fibre carries several capillaries in one strand, which is what gives the element its mechanical strength. Our ultrafiltration module guide covers selection, operating limits and the questions that decide which grade fits a duty.
Common questions
What is IntegraTec MB 38 called now?
DuPont has renamed it. IntegraTec MB 38 is now sold as DuPont™ Inge™ MB 0.9 XL 38 OP. The part number (IN-0070) and GMID (12071518) are unchanged, and so is the data sheet form number (45-D02254-en). It is the same module; only the brand name and the printed label have changed.
What are the published specifications for DuPont Inge MB 0.9 XL 38 OP (formerly IntegraTec MB 38)?
DuPont publishes the following in Form No. 45-D02254-en, Rev. 5 January 2026: Membrane Type: Multibore™; Membrane Material: PESm; Nominal Membrane Pore Size: 0.02 µm; Capillary Inner Diameter: 0.9 mm; Active Membrane Area: 38 m² / 409 ft²; Module Length (L): 985 ±1.5 mm / 38.8 inch; Module Diameter: 250 ±1.5 mm / 9.8 inch; Shipping Weight: 32 kg / 71 lbs; Housing Material: PVC-U, white.
What warranty applies?
None. DuPont’s Product Data Sheets state “NO WARRANTIES ARE GIVEN” and expressly exclude merchantability and fitness for a particular purpose, because performance depends on feed water and operating conditions they do not control. Confirm suitability for your duty before ordering.
Quoted, not listed. We are a B2B supplier and price this item to your
requirement and volume. Email sales@foreverpureplace.com or call
408-969-2688 with the model and quantity. Quoting the superseded name is fine — we cross-reference it.
DuPont™, Inge™, Multibore™ and IntegraTec™ are trademarks of affiliates of
DuPont de Nemours, Inc. Manufacturer’s published values, Form No. 45-D02254-en, Rev. 5 January 2026; subject to change without notice.
