DuPont™ Inge™ MB 1.5 XL 40 TRS — 40 m² Multibore™ PES ultrafiltration module for the TRS rack. Previously sold as DuPont™ IntegraTec MB 40 TR S.
DuPont has renamed this module. IntegraTec MB 40 TR S is now
DuPont™ Inge™ MB 1.5 XL 40 TRS. The part number IN-5103 and
GMID 12071529 are unchanged, and the data sheet keeps form number 45-D02245-en —
it is the same module. If your specification, drawing or purchase order still reads
“IntegraTec MB 40 TR S”, this is the item to order; the label and shipping paperwork will read the
Inge name. Tell us if your document control needs the superseded name shown on the packing list.
40 m²Active membrane area
0.02 µmNominal pore size
1.5 mmCapillary inner dia.
250 mmModule diameter
Specifications
| Identification | |
|---|---|
| DuPont Part Number | IN-5103 |
| DuPont GMID | 12071529 |
| Current product name | DuPont™ Inge™ MB 1.5 XL 40 TRS Module |
| Superseded name | DuPont™ IntegraTec™ MB 40 TR S |
| Membrane | |
| Membrane Type | Multibore™ |
| Membrane Material | PESm |
| Nominal Membrane Pore Size | 0.02 µm |
| Capillary Inner Diameter | 1.5 mm |
| Mode of Filtration | In-Out Pressurized |
| Module Operating Process | Dead-end |
| Dimensions | |
| Active Membrane Area | 40 m² / 431 ft² |
| Module Length Including T-Piece (L) | 1,879 mm / 74.0 inch |
| Module Diameter | 250 mm / 9.8 inch |
| Materials | |
| Housing Material | PVC-U, white |
| Weight and Volume | |
| Shipping Weight (module only) | 47 kg / 104 lbs |
| Weight Filled (module and frame) | 129 kg / 284 lbs |
| Hold-Up Volume, Feed (CIP) | 31 L / 8.1 gal |
| Hold-Up Volume, Membrane Structure (CIP) | 16 L / 4.2 gal |
| Hold-Up Volume, Filtrate (CIP) | 31 L / 8.2 gal |
| Suggested Operating Conditions | |
| Operating Temperature Range | 1 - 45 °C / 34 - 113 °F |
| Operating pH | 2 - 12 |
| Cleaning pH | 1 - 13 |
| Typical Filtration TMP | 0.1 - 0.6 bar / 1.5 - 8.7 psi |
| Typical Backwash TMP | 0.3 - 2.0 bar / 4.4 - 29.0 psi |
| Backwash Flux | 230 L/(m²h) / 135 gfd |
| Backwash Flow | 9.2 m³/h / 40.5 gpm |
| Operating Limits (Maximum) | |
| Filtration TMP | 1.5 bar / 22 psi |
| Backwash TMP | 3.0 bar / 44 psi |
| Filtration Flux | 180 L/(m²h) / 106 gfd |
| Filtration Flow | 7.2 m³/h / 31.7 gpm |
| Backwash Flux | 300 L/(m²h) / 176 gfd |
| Inlet Pressure at max 40°C | 5 bar / 73 psi |
| Rate of Pressure Change | 0.5 bar/sec / 7.3 psi/sec |
| Rate of Temperature Change | 5 °C/min / 9 °F/min |
| Particle Size | 300 µm |
| NaOCl Exposure | ≤ 500,000 ppm x h (at pH ≥ 9.5) |
| NaOCl Concentration | 2,000 ppm |
Values as published by DuPont in Form No. 45-D02245-en, Rev. 5 May 2026.
Supplied as
Each
About this technology
A Multibore™ module separates by physical size rather than by chemistry, so removal depends on pore size and membrane integrity rather than on feed chemistry. Each fibre carries several capillaries in one strand, which is what gives the element its mechanical strength. Our ultrafiltration module guide covers selection, operating limits and the questions that decide which grade fits a duty.
Common questions
What is IntegraTec MB 40 TR S called now?
DuPont has renamed it. IntegraTec MB 40 TR S is now sold as DuPont™ Inge™ MB 1.5 XL 40 TRS. The part number (IN-5103) and GMID (12071529) are unchanged, and so is the data sheet form number (45-D02245-en). It is the same module; only the brand name and the printed label have changed.
What are the published specifications for DuPont Inge MB 1.5 XL 40 TRS (formerly IntegraTec MB 40 TR S)?
DuPont publishes the following in Form No. 45-D02245-en, Rev. 5 May 2026: Membrane Type: Multibore™; Membrane Material: PESm; Nominal Membrane Pore Size: 0.02 µm; Capillary Inner Diameter: 1.5 mm; Active Membrane Area: 40 m² / 431 ft²; Module Length Including T-Piece (L): 1,879 mm / 74.0 inch; Module Diameter: 250 mm / 9.8 inch; Shipping Weight (module only): 47 kg / 104 lbs; Housing Material: PVC-U, white.
What warranty applies?
None. DuPont’s Product Data Sheets state “NO WARRANTIES ARE GIVEN” and expressly exclude merchantability and fitness for a particular purpose, because performance depends on feed water and operating conditions they do not control. Confirm suitability for your duty before ordering.
Quoted, not listed. We are a B2B supplier and price this item to your
requirement and volume. Email sales@foreverpureplace.com or call
408-969-2688 with the model and quantity. Quoting the superseded name is fine — we cross-reference it.
DuPont™, Inge™, Multibore™ and IntegraTec™ are trademarks of affiliates of
DuPont de Nemours, Inc. Manufacturer’s published values, Form No. 45-D02245-en, Rev. 5 May 2026; subject to change without notice.
