What is the maximum head/flow of the Grundfos CR 15-2?

The CR 15-2 produces approximately 170 ft of head at 85 GPM (best efficiency point), with a shutoff head of about 204 ft. That corresponds to roughly 73 psi at the BEP.

What is the Grundfos CR 15-2 material number / part number?

The primary material number for this configuration (3-phase 208-230/460, HQQE seal) is 99917468. Other voltage and seal options are listed in the variants table on this page.

Which motor does the Grundfos CR 15-2 use?

This SKU ships with a 5 HP, 3-phase, 208-230/460 V NEMA TEFC motor on a 182TC frame. Other motor configurations and IE3/IE5 upgrades are available on request.

Can the Grundfos CR 15-2 be paired with a variable frequency drive (VFD)?

Yes. Order the matching E-Pump variant with integrated MLE permanent-magnet motor, or pair this fixed-speed pump with a Grundfos CUE external VFD.

What is the typical lead time for the Grundfos CR 15-2?

Many configurations of the CR 15 series ship from stock through Grundfos USA. Contact ForeverPure Place for the current lead time on this specific material number (99917468).

Grundfos CR 15-2 5HP 3PH Pump | P/N 99917468

Description

Grundfos CR 15-2 — material number 99917468 — is a 2-stage Grundfos CR vertical multistage centrifugal pump with a 5 HP, 3-phase, 208-230/460 V NEMA TEFC motor and a HQQE shaft seal.

This 2-stage configuration produces a moderate 170 ft of head at the BEP (85 GPM, ~73 psi) and is the most common choice for low-rise commercial boosting and short pipe runs where modest pressure is needed.

Specifications

Model	CR 15-2
Stages	2
Flow at BEP	85 GPM
Head at BEP	170 ft (~73 psi)
Shutoff head (approx.)	204 ft
Motor	5 HP, 3-phase, 208-230/460 V, NEMA TEFC on 182TC frame
Shaft seal	HQQE (SiC/Carbon EPDM)
Materials	Cast iron head/base; 304 SS chambers and impellers
Material number (P/N)	99917468
Shipping weight	172 lbs
Frequency	60 Hz
Brand	Grundfos
Country of origin	Denmark / USA (varies by date code)

Dimensions

Approximate dimensions (vertical pump)
Overall height (pump + motor)	35.7 in
Pump body height (2 stages)	23.7 in
Base height (stage 0)	17.5 in
Added height per stage	3.1 in
Motor frame	See spec table above
Mounting	Vertical foot-mounted
Motor orientation	Vertical with NEMA motor stool above pump head

Note: Dimensions are approximate and based on the Grundfos CR 15 data booklet. Exact dimensions vary slightly by motor frame and base style. For certified installation drawings of this specific material number, request a quote and we'll provide the official Grundfos dimensional drawing.

Pipe Connections

The Grundfos CR 15 series is available with multiple connection types to match your installation requirements. Connection sizes for this series:

Connection options
Standard pipe connection (oval flange)	2 inch NPT
ANSI flange size	2 inch
ANSI flange class	250 lb
Inlet / outlet orientation	Suction and discharge on the same horizontal centerline (in-line)

Companion connections (gaskets, bolts, ANSI flanges or Victaulic couplings) are ordered separately. Contact ForeverPure for the matched connection kit part numbers for your specific configuration.

Available Configurations / Material Numbers

The CR 15-2 ships in several phase, voltage, and seal combinations. Material numbers for the most common variants:

Phase / Voltage	Seal	Motor HP	Weight	Material Number
1-phase, 208-230	HQQE	5 HP	203 lbs	`99917438`
3-phase, 208-230/460	HQQE	5 HP	172 lbs	`99917468`
1-phase, 208-230	HQQV	5 HP	203 lbs	`99917453`
3-phase, 208-230/460	HQQV	5 HP	172 lbs	`99917473`
3-phase, 208-230/460	HQQV	5 HP	174 lbs	`99917469`
1-phase, 208-230	HQQV	5 HP	205 lbs	`99917454`
3-phase, 208-230/460	HQQV	5 HP	174 lbs	`99917474`
3-phase, 208-230/460	HQQV	5 HP	200 lbs	`99917470`
1-phase, 208-230	HQQV	5 HP	228 lbs	`99917455`
3-phase, 208-230/460	HQQV	5 HP	200 lbs	`99917475`
1-phase, 208-230	HQQE	5 HP	205 lbs	`99917458`
3-phase, 208-230/460	HQQE	5 HP	174 lbs	`99917478`
1-phase, 208-230	HQQV	5 HP	205 lbs	`99917463`
3-phase, 208-230/460	HQQV	5 HP	174 lbs	`99917489`
3-phase, 208-230/460	HQQV	5 HP	176 lbs	`99917479`
1-phase, 208-230	HQQV	5 HP	207 lbs	`99917464`
3-phase, 208-230/460	HQQV	5 HP	176 lbs	`99917490`
3-phase, 208-230/460	HQQV	5 HP	203 lbs	`99917480`
1-phase, 208-230	HQQV	5 HP	231 lbs	`99917465`
3-phase, 208-230/460	HQQV	5 HP	284 lbs	`99917491`

Typical Applications

Boiler feed water in industrial steam plants
Cooling tower makeup water
High-rise commercial pressure boosting
HVAC chilled water circulation
Fire protection jockey pump
Light industrial process water

Datasheet & Documentation

Frequently Asked Questions

What is the maximum head/flow of the Grundfos CR 15-2?: The CR 15-2 produces approximately 170 ft of head at 85 GPM (best efficiency point), with a shutoff head of about 204 ft. That corresponds to roughly 73 psi at the BEP.
What is the Grundfos CR 15-2 material number / part number?: The primary material number for this configuration (3-phase 208-230/460, HQQE seal) is 99917468. Other voltage and seal options are listed in the variants table on this page.
Which motor does the Grundfos CR 15-2 use?: This SKU ships with a 5 HP, 3-phase, 208-230/460 V NEMA TEFC motor on a 182TC frame. Other motor configurations and IE3/IE5 upgrades are available on request.
Can the Grundfos CR 15-2 be paired with a variable frequency drive (VFD)?: Yes. Order the matching E-Pump variant with integrated MLE permanent-magnet motor, or pair this fixed-speed pump with a Grundfos CUE external VFD.
What is the typical lead time for the Grundfos CR 15-2?: Many configurations of the CR 15 series ship from stock through Grundfos USA. Contact ForeverPure Place for the current lead time on this specific material number (99917468).

Related Products

Need quotes, lead-time confirmation, or technical assistance? Contact ForeverPure Place — we'll price the exact configuration (99917468) and check current stock with Grundfos USA.